BALL VALVE,FULL JECKETING,150#

PNO. NOMENCLATURE MATERIAL
1 BODY CS / SS 304 / SS 316
2 SIDE PIECE CS / SS 304 / SS 316
3 BALL SS 304 / SS 316
4 GLAND SS 304 / SS 316
5 STEM SS 304 / SS 316
6 BODY SEAT PTFE
7 STEM SEAT PTFE
8 GLAND PACKING PTFE
9 BODY SEAL PTFE
10 STOPPER PLATE CS / SS 304 / SS 316
11 GLAND NUT CS / SS 304 / SS 316
12 DRIN PLUG CS / SS 304 / SS 316
13 STUD-NUT & WASHER ASTM A193 B7 / A194 2H
14 LEVER CS / SS 304 / SS 316
15 JECKET CS / SS 304 / SS 316
16 1/2″ INLET & OUTLET CONNECTION CS / SS 304 / SS 316
SIZE ØNB A ØF FT ØRF ‘P’ Ø’d’ ‘N’ QTY.
25×50 24 127 152.4 15.9 92 120.6 19 4
50×80 49 177.8 190.5 19.1 127 152.4 19 4
80×100 75 203.2 228.6 23.9 157 190.5 19 8
100×150 98 228.6 279.4 25.4 216 241.3 22.2 8
150×200 148 266.7 343 28.6 270 298.5 22.2 8
200×250 198 292.1 406.4 30.2 324 362.0 25.4 12
250×300 248 330.2 482.6 31.8 381 431.8 25.4 12

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.

LIFT CHECK VALVE,FULL JACKETED,150#

BILL OF MATERIAL
PNO. NOMENCLATURE MATERIAL
1 BODY CS / SS 304 / SS 316
2 COVER CS / SS 304 / SS 316
3 DISC SS 410 / SS 304 / SS 316
4 SEAT RING SS 410 / SS 304 / SS 316
5 GUID PIN SS 410 / SS 304 / SS 316
6 GASKET SS SPIRAL WOUNDED
7 STUD / NUT ASTM A 193 B7 / A 194 2H
8 JACKET SS 410 / SS 304 / SS 316
9 1/2″ CONNECTION SS 410 / SS 304 / SS 316
10 PLUG SS 410 / SS 304 / SS 316
HYDRO TEST PRESSURE
SHELL SEAT
32 kg/cm2 22 kg/cm2
Jacket pr. 10 kg/cm2
SIZE ØNB A ØF FT ØRF ‘P’ Ø’d’ ‘N’ QTY
25×50 25.4 127 152.4 15.9 92 120.6 19 4
50×80 50.8 203.2 190.5 19.1 127 152.4 19 4
80×100 76.2 241.3 228.6 23.9 157 190.5 19 8
100×150 101.6 292.1 279.4 25.4 216 241.3 22.2 8
150×200 152.4 406.4 343 28.6 270 298.5 22.2 8
200×250 203.2 495.3 406.4 30.2 324 362.0 25.4 12
250×300 254 622.3 482.6 31.8 381 431.8 25.4 12
DESIGN & MFG. CODE BS 1868
INSPECTION & TESTING API 598
FACE TO FACE ASME B 16.10
END CONNECTION ASME B 16.5 R/F (ONE SIZE HIRE)
CLIENT
OP.O. NO.

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.

SWING CHECK VALVE,FULL JACKETING

BILL OF MATERIAL
PNO. NOMENCLATURE MATERIAL
1 BODY CS / SS 304 / SS 316
2 COVER CS / SS 304 / SS 316
3 DISC SS 410 / SS 304 / SS 316
4 SEATRING SS 410 / SS 304 / SS 316
5 HINGE PIN SS 410 / SS 304 / SS 316
6 HINGE CS / SS 304 / SS 316
7 PLUG (NOT SHOWN) SS 410 / SS 304 / SS 316
8 DISC WASHER SS 410 / SS 304 / SS 316
9 DISC NUT SS 410 / SS 304 / SS 316
10 GASKET SS SPIRAL WOUNDED
11 STUD ASTM A 193 Gr.B7
12 NUT ASTM A 194 Gr. 2H
13 LOCK PIN SS 410 / SS 304 / SS 316
14 JACKET CS / SS 304 / SS 316
15 1/2″ INLET & OUTLET CONNECTION CS / SS 304 / SS 316
16 DRAIN PLUG SS 410 / SS 304 / SS 316
HYDRO TEST PRESSURE
SHELL SEAT
32 kg/cm2 22 kg/cm2
Jacket pr. 10 kg/cm2
SIZE ØNB A ØF FT ØRF ‘P’ Ø’d’ ‘N’ H QTY
25×50 25.4 127 152.4 15.9 92 120.6 19 4 105
50×80 50.8 203.2 190.5 19.1 127 152.4 19 4 130
80×100 76.2 241.3 228.6 23.9 157 190.5 19 8 160
100×150 101.6 292.1 279.4 25.4 216 241.3 22.2 8 215
150×200 152.4 355.6 343 28.6 270 298.5 22.2 8 225
200×250 203.2 495.3 406.4 30.2 324 362.0 25.4 12 265
250×300 254 622.3 482.6 31.8 381 431.8 25.4 12 325
CONTRUCTION SWING CHECK VALVE,SWING TYPE DISC, RENEWABLE SEATRING AND BOLTED COVER OF JACKETING
DESIGN & MFG. CODE ASME B16.34 & BS 1868
INSPECTION & TESTING API 598 / BS 6755 PART 1
FACE TO FACE ASME B 16.10
END CONNECTION ASME B 16.5 R/F (ONE SIZE HIRE)
CLIENT
OP.O. NO.

JACKETED PLUG VALVE

NOTE :- ALL DIMENTION ARE IN MM UNLESS OTHERWISE SPECIFIED.