Home About us Enquiry Contact us
 
Pinch Valves
 
DESIGN FEATURES :
TYPE CLOSED BODY
WORKING PRESSUAE 150SIG MAX AT 150°. C
FLANGES AS PER BS 10 TABLE 'D' OR AS SPECIFED
 
PNO. NOMENCLATURE QTY MATERIAL
1 BODY 1 IS210 Gr. 220 C.I. / ALUMINUM
2 INTERNALS 1 CARBON STEEL
3 SLEEVE 1 NEOPRENE RUBBER
4 HANDWHEEL 1 CAST - IRON
SIZE 'A' 'B' 'D' 'T'
1"/25 145.8 152 144 11
1.5"/40 169 174 133 11
2"/50 196 206 152 12
3"/76 261 269 184 12
4"/100 345 354 215 17
5"/127 447 457 254 17
6"/152 533 542 279 17
8"/203 698 709 335 17
SPECIAL FEATURES
  • Suitable For Corrosive Liquors, Abrasive, Powders Both In And Fluids Are As Efficiently Handled As Clear Liquids Or Gases.
  • When Open, Flow Resistance Or Gases  
  • There Is Absolutely No Possibility Of Chocking Of Pinch Valves
  • Metallic Pars In The Valve Are Isolated Both From The And From Atmospheric Conditions
  • Neoprene Sleeves Can Be Easily Replaced Without Dismantling The Valve From The Pipeline
INSTALLATION AND MAINTENANCE
 
Valves Are Normally Supplied Drilled Bs 10 Table D (B.S.T.D.) They Should Be Lubricated In Service As Most Grades Of Rubber Are Attacked Oil To Change The Tube. The Bottom Body Casting Should Be Removed By Undoing The Body Bolts. The Tube Easily Placed The Opportunity Should Be Taken To Smear The Top And Bottom Body Castings Are Provided With Mating Marks For Correct Re- Assembly Excessive Force Should Never Be Applied To Hand wheel For Closing Or Opening The Valve The Use Of Levers Or Other Mechanical Advantage Is Likely To Damage The Mechanism
 
 
 
Product Range
Ball Valve
Butterfly Valve Central Disc
Butterfly Valve Offset Disc
Diaphragm Valve
Disc Check Valve Non Slame
Dual Plate Check Valve
Forged Steel Valve 800#, 1500#, 2500#
Gate Valve
Knife Edge Gate Valve
Globe Valve
Jacketed Valve
Needle Valve
Non Return Valve Single Plate
Pinch Valves
Plug Valve
Pulp Valve
Steam Trap
Swing Check Valve
Strainer
 
 
 
Home | About us | Enquiry | Contact us
Copyright © 2013 -14 by Fiksar Valve Mfg Company All Rights Reserved.
Website Maintain by: #1 Outsourcing Web Designing & Outsourcing Web Promotion Company :: #1 Vinayak InfoSoft